RÓdio Balaguer
Benvinguts als f˛rums de www.radiobalaguer.cat
 
 FAQFAQ   BuscarBuscar   Llista de MembresLlista de Membres   Grups d'UsuarisGrups d'Usuaris   Registrar-seRegistrar-se
 PerfilPerfil   Inicia una sessiˇ per veure els teus missatges privatsInicia una sessiˇ per veure els teus missatges privats   Iniciar SessiˇIniciar Sessiˇ
FFP2 masks

 
Publicar un tema nou   Respondre al tema    ═ndex del F˛rum de RÓdio Balaguer -> LA JOVENTUT EN MARXA
Veure tema anterior :: Veure tema segŘent  
Autor Missatge
lychee9416



Registrat: 28 Jul 2020
Missatges: 1163

MissatgePublicat: Dj Mar 25, 2021 11:47 am    Assumpte: FFP2 masks Respondre citant

FFP2 masks consult masks that meet that European (CEEN149: 2001) benchmarks. The European standards to get protective masks are split into three levels: FFP1, FFP2, as well as FFP3. The difference with the American standard is which its detection flow rate adopts 95L/min, and DOP oil is required to generate dust. The role could be to absorb harmful aerosols, such as dust, smoke, mist, toxic gases and poisonous vapors, over the filter material, and block them from being inhaled simply by people.
Different FFP2 types of masks use different filtration materials. On the you hand, the filtering effect relates to the particle size belonging to the particles, and it can be affected by whether the particular particles contain oil. FFP2 masks are usually classified according to purification efficiency and whether there're suitable for filtering slimy particles. Oil-free particles including dust, water-based mist, paint spots mist, oil-free fumes (welding fumes), microorganisms, etc. Although the filter components of "non-oily particulate matter" are more common, they are not suitable for oily particulate matter, just like oil mist, oil fume, message fume, coke oven fume, etc. The filter material ideal for oily particles can also be used for non-oily dust.
The outer layer connected with FFP2 masks tends to accumulate plenty of dust, bacteria and other dirt while in the outside air, while that inner layer blocks exhaled microorganisms and saliva. Therefore, the two sides cannot be employed alternately, otherwise the dirt about the outer layer will always be directly It becomes a way to obtain infection by inhaling our bodies when it is close to the face. When you will not be wearing the mask, you should fold it into the clean envelope, fold along side it close to your nasal and mouth, and don't just stuff it inside your pocket or hang the idea around your neck.
FFP2 masks are very much alike N95 and KN95 masks and can not be cleaned. Because it becomes wet, the mask can release static electricity, and it are not able to absorb dust which includes a diameter less than 5um.
High-temperature steam disinfection resembles cleaning. Water vapor may also cause static discharge, that'll cause the mask to help fail.
https://www.renaultbio.com/FFP2-Mask-pl3513343.html
2021ld
Tornar a dalt
Veure perfil de l'usuari Enviar missatge privat
Mostrar missatges d'anteriors:   
Publicar un tema nou   Respondre al tema    ═ndex del F˛rum de RÓdio Balaguer -> LA JOVENTUT EN MARXA Totes les hores sˇn GMT + 2 Hores
PÓgina 1 de 1

 
Canviar a:  
No pots publicar nous temes en aquest f˛rum
No pots respondre a temes en aquest f˛rum
No pots editar els teus missatges en aquest f˛rum
No pots esborrar els teus missatges aquest f˛rum
No pots votar a les enquestes en aquest f˛rum


Powered by phpBB